Aiyangar, A. K.; Zheng, L.; Tashman, S.; Anderst, W. J.; Zhang, X. Capturing three-dimensional in vivo lumbar intervertebral joint kinematics using dynamic stereo-X-ray imaging. J. Biomech. Eng. 2014, 136 (1), 011004 (9 pp.). https://doi.org/10.1115/1.4025793

Aiyangar, A. K.; Vivanco, J.; Au, A. G.; Anderson, P. A.; Smith, E. L.; Ploeg, H. L. Dependence of anisotropy of human lumbar vertebral trabecular bone on quantitative computed tomography-based apparent density. J. Biomech. Eng. 2014, 136 (9), 091003 (10 pp.). https://doi.org/10.1115/1.4027663

Arnautov, A. K.; Terrasi, G. P.; Kulakov, V. L.; Portnov, G. G. Fastening of a high-strength composite rod with a splitted and wedged end in a potted anchor. 1. Experimental investigation. Mech. Compos. Mater. 2014, 49 (6), 595-604. https://doi.org/10.1007/s11029-013-9376-9

Battisti, A.; Esqué-de los Ojos, D.; Ghisleni, R.; Brunner, A. J. Single fiber push-out characterization of interfacial properties of hierarchical CNT-carbon fiber composites prepared by electrophoretic deposition. Compos. Sci. Technol. 2014, 95 (10), 121-127. https://doi.org/10.1016/j.compscitech.2014.02.017

Carey, R. E.; Zheng, L.; Aiyangar, A. K.; Harner, C. D.; Zhang, X. Subject-specific finite element modeling of the tibiofemoral joint based on CT, magnetic resonance imaging and dynamic stereo-radiography data in vivo. J. Biomech. Eng. 2014, 136 (4), 041004 (8 pp.). https://doi.org/10.1115/1.4026228

Haba, D.; Kaufmann, J.; Brunner, A. J.; Resch, K.; Teichert, C. Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM – discerning facts and artifacts. Polymer 2014, 55 (16), 4032-4040. https://doi.org/10.1016/j.polymer.2014.06.030

Habrard, F.; Patscheider, J.; Kovacs, G. Stretchable metallic electrodes for electroactive polymer actuators. Adv. Eng. Mater. 2014, 16 (9), 1133-1139. https://doi.org/10.1002/adem.201300569

Herwig, A.; Piskoty, G.; Terrasi, G. P. Zur Modellierung des Tragverhaltens eines Balken-Stützen-Systems im Rahmen der Abklärungen eines Dacheinsturzes. Beton. Stahlbetonbau 2014, 109 (4), 296-301. https://doi.org/10.1002/best.201300051

Jones, R.; Stelzer, S.; Brunner, A. J. Mode I, II and Mixed Mode I/II delamination growth in composites. Compos. Struct. 2014, 110, 317-324. https://doi.org/10.1016/j.compstruct.2013.12.009

Koller, R. E.; Stoecklin, I.; Valet, S.; Terrasi, G. P. CFRP-strengthening and long-term performance of fatigue critical welds of a steel box girder. Polymers 2014, 6 (2), 443-463. https://doi.org/10.3390/polym6020443

Kulakov, V. L.; Terrasi, G. P.; Arnautov, A. K.; Portnov, G. G.; Kovalov, A. O. Fastening of a high-strength composite rod with a splitted and wedged end in a potted anchor 2. Finite-element analysis. Mech. Compos. Mater. 2014, 50 (1), 39-50. https://doi.org/10.1007/s11029-014-9391-5

Lura, P.; Terrasi, G. P. Reduction of fire spalling in high-performance concrete by means of superabsorbent polymers and polypropylene fibers small scale fire tests of carbon fiber reinforced plastic-prestressed self-compacting concrete. Cem. Concr. Compos. 2014, 49, 36-42. https://doi.org/10.1016/j.cemconcomp.2014.02.001

Maluk, C.; Terrasi, G. P.; Bisby, L. A.; Stutz, A.; Hugi, E. Experimental fire behaviour of precast CFRP pretensioned HPSCC SLABS. In Proceedings of the 7^th international conference on FRP composites in civil engineering (CICE 2014), presented at the 7^th international conference on FRP composites in civil engineering (CICE 2014), Vancouver, British Columbia, Canada, August 20–22, 2014; El-Hacha, R., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2014; p (6 pp.).

Maluk, C.; Bisby, L.; Terrasi, G. P. Experimental parametric study on the effectiveness of polypropylene fibres at mitigating heat-induced concrete spalling. Concr. Aust. 2014, 40 (3), 32-37.

Maluk, C.; Bisby, L. A.; Terrasi, G. P. Thermo-mechanical compatibility of CFRP versus steel reinforcement for concrete at high temperature. In Proceedings of the 7^th international conference on FRP composites in civil engineering (CICE 2014), presented at the 7^th international conference on FRP composites in civil engineering (CICE 2014), Vancouver, Canada, August 20–22, 2014; El-Hacha, R., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2014; p (6 pp.).

Meier, U.; Terrasi, G. P.; Gao, J. Reinforced concrete and carbon fiber reinforced polymers (CFRPS). In Concrete and reinforced concrete – glance at future, presented at the III All-Russian (II international) conference on concrete and reinforced concrete, Moscow, Russia, May 12–16, 2014; Gusev, B. V., Zvezdov, A. I., Tamrazyan, A. G., Falikman, V. R., Eds.; REA: Moscow, 2014; Vol. 3, pp 41-50.

Meier, U.; Terrasi, G. P.; Gao, J. Use of the time-temperature superposition principle for the prediction of FRP creep data. In Proceedings of the 7^th international conference on FRP composites in civil engineering (CICE 2014), presented at the 7^th international conference on FRP composites in civil engineering (CICE 2014), Vancouver, British Columbia, Canada, August 20–22, 2014; El-Hacha, R., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2014; p (6 pp.).

Michel, S.; Piskoty, G.; Schmidlin, A.; Fürst, A. Bending and torsional stiffness measurements of equine radii and tibiae. Pferdeheilkunde 2014, 30 (5), 577-584. https://doi.org/10.21836/PEM20140509

Ritschel, F.; Sause, M. G. R.; Brunner, A. J.; Niemz, P. Acoustic emission (AE) signal classification from tensile tests on plywood and layered wood. Presented at the 31st conference of the European working group on acoustic emission (EWGAE), Dresden, Germany, September 3–5, 2014; p Fr.3.A.2 (7 pp.).

Ritschel, F.; Zhou, Y.; Brunner, A. J.; Fillbrandt, T.; Niemz, P. Acoustic emission analysis of industrial plywood materials exposed to destructive tensile load. Wood Sci. Technol. 2014, 48 (3), 611-631. https://doi.org/10.1007/s00226-014-0628-1

Schläpfer, B.; Brunner, A. J.; Kress, G. Optimal design and testing of laminated light-weight composite structures with local reinforcements considering strength constraints Part II: testing. Composites A 2014, 61, 279-287. https://doi.org/10.1016/j.compositesa.2014.02.007

Senteler, M.; Weisse, B.; Snedeker, J. G.; Rothenfluh, D. A. Pelvic incidence–lumbar lordosis mismatch results in increased segmental joint loads in the unfused and fused lumbar spine. Eur. Spine J. 2014, 23 (7), 1384-1393. https://doi.org/10.1007/s00586-013-3132-7

Stelzer, S.; Pinter, G.; Brunner, A. J. Comparison of quasi-static and cyclic fatigue delamination resistance of carbon fiber reinforced polymer-matrix laminates under different mode loading. In 20th European conference on fracture, presented at the 20th European conference on fracture (ECF20), Trondheim, Norway, 30th of June - 4th of July, 2014; Zhang, Z., Skallerud, B., Thaulow, C., Østby, E., He, J., Eds.; Procedia materials science; Elsevier, 2014; Vol. 3, pp 1087-1092. https://doi.org/10.1016/j.mspro.2014.06.177

Stelzer, S.; Brunner, A. J.; Argüelles, A.; Murphy, N.; Cano, G. M.; Pinter, G. Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: results from ESIS TC4 round-robins. Eng. Fract. Mech. 2014, 116, 92-107. https://doi.org/10.1016/j.engfracmech.2013.12.002

Terrasi, G. P.; Meier, U. Long term bending creep behaviour of thin-walled CFRP pretensioned high strength spun concrete poles under sustained load. In Proceedings of the 7^th international conference on FRP composites in civil engineering (CICE 2014), presented at the 7^th international conference on FRP composites in civil engineering (CICE 2014), Vancouver, Canada, August 20–22, 2014; El-Hacha, R., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2014; p (6 pp.).

Terrasi, G. P.; Meier, U.; Affolter, C. Long-term bending creep behavior of thin-walled CFRP tendon pretensioned spun concrete poles. Polymers 2014, 6 (7), 2065-2081. https://doi.org/10.3390/polym6072065

Thorwarth, K.; Thorwarth, G.; Figi, R.; Weisse, B.; Stiefel, M.; Hauert, R. On interlayer stability and high-cycle simulator performance of diamond-like carbon layers for articulating joint replacements. Int. J. Mol. Sci. 2014, 15 (6), 10527-10540. https://doi.org/10.3390/ijms150610527

Toumpanaki, E.; Lees, J. M.; Terrasi, G. P. Measurement of the sand coating layer in CFRP tendons trough image processing. In Proceedings of the 7^th international conference on FRP composites in civil engineering (CICE 2014), presented at the 7^th international conference on FRP composites in civil engineering (CICE 2014), Vancouver, British Columbia, Canada, August 20–22, 2014; El-Hacha, R., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2014; p (6 pp.).

Valet, S.; Weisse, B.; Kuebler, J.; Zimmermann, M.; Affolter, C.; Terrasi, G. P. Are asymmetric metal markings on the cone surface of ceramic femoral heads an indication of entrapped debris? Biomed. Eng. Online 2014, 13 (1), 38 (22 pp.). https://doi.org/10.1186/1475-925X-13-38

Vergeynst, L. L.; Sause, M. G. R.; Ritschel, F.; Brunner, A. J.; Niemz, P.; Steppe, K. Finite element modelling used to support wood failure identification based on acoustic emission signals. In COST timber bridge conference, presented at the COST timber bridge conference (CTBC 2014), Biel, Switzerland, September 25–26, 2014; Franke, S., Franke, B., Widmann, R., Eds.; Bern University of Applied Sciences: Bern, Switzerland, 2014; pp 141-146.

Vucaj, N.; Quinn, M. D. J.; Baechler, C.; Notley, S. M.; Cottis, P.; Hojati-Talemi, P.; Fabretto, M. V.; Wallace, G. G.; Murphy, P. J.; Evans, D. R. Vapor phase synthesis of conducting polymer nanocomposites incorporating 2D nanoparticles. Chem. Mater. 2014, 26 (14), 4207-4213. https://doi.org/10.1021/cm5014653

Xu, D.; McKay, T. G.; Michel, S.; Anderson, I. A. Enabling large scale capacitive sensing for dielectric elastomers. In Electroactive polymer actuators and devices (EAPAD) 2014, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, March 9-13, 2014; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE, 2014; Vol. 9056, p 90561A (8 pp.). https://doi.org/10.1117/12.2044356